Coral Sea Redux?

Earlier this week I attended the Battle of the Coral Sea 70th Anniversary Commemoration at Washington, D.C.’s Navy Memorial. Rain earlier in the morning threatened to push the event indoors, but the weather was blessedly cool and dry. Yet storm clouds might be gathering on the horizons of the Australian-American partnership the ceremony celebrated.

 

70 years ago, a clash of carriers handed the Japanese their first major defeat in the war in the Pacific, turning back an invasion force enroute to Port Moresby. As the Australian ambassador noted on Tuesday it also signaled a change in Australia and New Zealand’s defense formulations. Britain’s ability and responsibility to defend her imperial possessions and former colonies formed the bedrock of the nations’ pre-war planning.

 

According to the honourable Kim Beazley, the structure of British imperial defense “had crashed on land with the Japanese capture of Singapore, and at sea with the sinking of the British warships Prince of Wales and Repulse.” The American decision to risk carriers to parry the southern thrust threatening Australia – while so much else in the theater was at stake – was praised and highlighted as one of the key moments later bringing the nation under the American security umbrella, where it has remained ever since.

 

A Future Crisis

Could Australia face another crisis and restructuring of its strategic security arrangements down the road? This depends much on the ability of China and the U.S. to play nice. Australia is bound to the U.S. in the ANZUS treaty, a firm defense alliance between the two nations and New Zealand (the Yankee/Kiwi portion has been much less firm, but is improving), and has contributed forces to major American-led military conflicts from Korea to Afghanistan. Just last month, U.S. Marines began to deploy to Darwin, Australia, as a step towards strengthening ties (unofficially, in the face of growing Chinese regional clout).

 

Coming soon to a down-under near you.

However, Australia is much more commercially dependent upon the Chinese than the U.S., exporting less than a quarter of the goods to the U.S. it does to China, its biggest trading partner by both exports and imports. A serious spat between the two nations could cause Australians to rethink the benefits of their closeness to the Americans, especially if the cause of the row was of only marginal importance to the Aussies.

 

Similarly, the Chinese could begin to apply economic leverage to force Australia to scale back the level of its security and basing commitments (although done poorly this could risk a backlash). Conversely, the Chinese want to boost their own ties with Australia. In an April interview, Rory Medcalf, director of the Lowy Institute for International Policy in Australia pointed out:

Beijing has recently asked, or warned, Australia to build stronger security and strategic dimensions into its ties with China, to bring them more in balance with the very strong trade ties. In fact, Australia’s military already has quite good relations with the People’s Liberation Army and has provided a conduit of contact during phases when U.S.-China and Japan-China military-to-military ties were in trouble.”

Might Australia decide in the future it’s better to step from under the American umbrella and risk rain rather than a lightning strike? Might the Royal Australian Navy’s highly skilled mariners and expanding fleet be kept in port in the event of a conflict?

 

Some voices are already cautioning against more closely embracing the American military build-up in the Asia-Pacific, warning of the danger of being drawn into “someone else’s” fight with the potential for dire economic consequences. This appears to be a minority opinion among the public and politicians. According to the Lowy Institute, 85% of Australians are to some extent supportive of the U.S. alliance. As Mr. Medcalf states:

if Canberra is asked any time soon to make hard strategic choices between China and the United States, the signs are clear about the choice it would make—it has intensified the alliance with the United States.”

Yet Mr. Medcalf also correctly points out 15% is a substantial minority, and could grow as the American footprint expands in Australia. I don’t foresee Australia dropping the U.S. for China as its main strategic guarantor any time soon, but if the relationship between the two nations is handled poorly by either side, and its benefits not fully explained, the Chinese would be only too happy to exploit the opportunity and apply pressure to limit Australia’s commitments.

 

The Americans can help ensure this doesn’t happen. Proactive prevention of the sort of liberty incidents that so inflamed relations with another key partner to the north are vital. Aggressive goodwill diplomacy and exchanges can remind the Australian public of shared values.

 

And of course, events like the commemoration of the Battle of the Coral Sea remind both nations of shared sacrifices. Said Ambassador Beazley:

As the distribution of global power becomes more diffuse, it is useful for us to have as a reminder American risk-taking for its friends at a time when the US position was by no means the superior one.”

Coverage of the commemoration down under: http://www.canberratimes.com.au/act-news/us-flags-stronger-security-ties-with-aust-20120503-1y228.html

 

Battlefield Reclamation and 3D Printing

The king is dead, long live the king.

5th and final post in our series on 3D printing.

3D printing revolutionizes the supply chain by removing the need for many specific parts, but it still lacks true independence due to the need for “toner.” If necessary, a soldier in the field can pick up the weapon of his neutralized enemy and use it to continue the fight, but the wreckage of war is often left to rot, useless for more than cover. However, the great material waste found in war can generate immense new capabilities when combined with 3D printing’s need for raw materials.

In the further future, the commander’s greatest source of raw materials for his new 3D printing capability will be the wreckage of the battlefield and waste from his own operations. Everything from the valuable copper in rubble to the wreckage of destroyed vehicles. In most cases, materials can be collected whole: tanks, humvees, burnt-out trucks, bullet casings. Obsolete or worn equipment can be harvested for its raw materials and re-forged into new product.  Modern composite weapons can be smashed, damaged, or past their service life; thrown back into the “stock material,” and recycled into a new rifle. Battlefield clearance, broken weapons, and ruined equipment stop being a hindrance and start becoming potential resources for the commander armed with 3D printing.

Whatever cannot be easily ground down and re-purposed can be leached out and re-used. Biomining is the process by which natural and engineered bacteria are used to collect raw material. Industrial-scale use of bacteria to make product is not revolutionary. Beer is the oldest, and perhaps most delicious example that comes to mind for the industrial use of bacteria. Soon we might start using it for fuel. Biomining is already used to leach minerals from low-grade ores, it could potentially salvage materials from rubble or severely degraded equipment.

The direct applications to maritime operations are especially evident for landing operations and damage control. Amphibious landings are always made more precarious by the supply situation, logistics’ tenuous reach to a force on the shore that could potentially be pushed into the sea. With the ability to re-purpose his surrounding environment: cars, computers, telephone wires, etc… a landing force no longer need wait for guns, vehicles, parts, or replacement equipment when these things can be resurrected from wreckage or indigenous infrastructure. At sea, battle-damaged ships can re-forge equipment out of the destroyed material. Imagine if the USS Cole had a 3D printing capability, giving it the ability to replace without restriction any number of critical systems. These ideas only scratch the surface. As the logistics, shape, and field operations of all military forces profoundly transform, not only will our weapons change, but the way we fight will transform with this newfound flexibility and independence.

Matt Hipple is a surface warfare officer in the U.S. Navy. The opinions and views expressed in this post are his alone and are presented in his personal capacity. They do not necessarily represent the views of U.S. Department of Defense or the U.S. Navy. 

Crowdsourcing the Next Navy

When we think of navies, we think of tradition.

Source: Navy History and Heritage Command

The peculiar lexicon of Sailors (scuttlebutt, trice up, and wildcat come to mind), the boatswain’s pipe and lanyard, and the Beaux Arts architecture at the US Naval Academy in Annapolis are all audible or tangible indicators of the Navy’s reliance on tradition. As a result, innovation often seems antithetical to naval culture. An account from Geoffrey Till’s chapter in this book illustrates the Royal Navy’s resistance to the Aircraft Carrier:

No greater modification of any [of Her Majesty’s] ships that I proposed would have had the smallest chance of acceptance at that time. Prior to the First World War, the navy had no war experience for a very long time; and a long peace breeds conservatism and hostility to change in senior officers. Consequently, revolutionary ideas which were readily accepted when war came, were unthinkable in the peacetime atmosphere of 1912. Circumscribed by the then existing limitations my proposal was the furthest one could hope to go. – Lieutenant Hugh Williamson, RN (Page 192)

Fiscal austerity is forcing naval leaders to think about innovation: how do we use scarce means to provide the strategic ends we need? Over at Small Wars, the USNI Blog, and others, the term “disruptive thinker” has surged to the forefront of military professional discourse. At issue: do our military institutions produce and value disruptive thinkers and disruptive thoughts to foster innovation? The US Navy, however, beat everyone to the punch with little fanfare. Back in February, it quietly instituted a program to solicit disruptive ideas for development and potential adoption. In a US Fleet forces Command message (DTG 290708Z FEB 12), the Navy announced a new concept development program run jointly between Fleet Forces and the Naval Warfare Development Command. The message goes on to say:

VALUABLE IDEAS CAN COME FROM ANYWHERE, AND THE NAVY CONCEPT GENERATION AND CONCEPT DEVELOPMENT PROGRAM...WAS ESTABLISHED TO PROVIDE A COLLABORATIVE APPROACH FOR HARVESTING NEW IDEAS AND DEVELOPING THEM INTO CAPABILITIES FOR THE FLEET.

In January, I published an article in Proceedings jointly authored with a Chief from my previous command. He received the Fleet Forces message and phoned me immediately to push our idea through this program. I was initially skeptical: would our idea disappear into an invisible morass of bureaucracy? Would we ever receive feedback? Is this just a relief valve for unorthodox concepts?

Today, I can say firsthand that this new concept generation and development program is one of the most open and transparent processes I’ve ever seen. Action officers at the O-5/O-6 level worked with me to submit a concept proposal and have kept me regularly updated regarding its potential adoption. Senior officers and civilians at Fleet Forces (many of whom finished careers in the Navy and Marine Corps) are hungry for new ways of fighting, or of manning, training, and equipping the fighters. Junior officers and enlisted Sailors are a focus of this initiative.

For those disruptive thinkers out there, the Navy is waiting to hear from you. Cultures change – even ones that value tradition as much as the Navy. That’s because no one cultural narrative ever fits perfectly: the US Navy places great value not just on tradition, but also on independence and decentralization. We already crowdsource warfare. This model equally applies to peacetime innovation.

For more information, see the governing instruction. Those with appropriate access can go to HTTP://FIMS.NWDC.NAVY.SMIL.MIL/PORTALS/CONCEPTS/DEFAULT.ASPX to submit proposals. Also, the Naval Warfare Development command is holding a Junior Leader Innovation Symposium in Norfolk on 6 June. Registrants can attend either in person or virtually.

The opinions and views expressed in this post are those of the author alone and are presented in his personal capacity. They do not necessarily represent the views of U.S. Department of Defense, the U.S. Navy, or any other agency.

3D Printing: Integration Afloat

Not as useful to steal from the ship’s store.

The fourth installment in our series on 3D printing’s impact on the future of the world’s fleets.

In this post I’ll examine the impact on fleet logistics, complications that must be worked out, and the likely uses at sea.

As Matt Hipple pointed out, 3D printing has the potential to affect U.S. Navy logistics by accelerating repair time; reducing costs from excess parts, personnel, and facilities; and reducing costs by transporting raw materials instead of parts – or purchasing the materials at the destination.

This new type of manufacturing will also require new contracting business models. Whether the U.S. Navy maintains its own shore-side printing facilities, which I anticipate as likely in order to hone and develop its engineers’ skills, or just incorporates them into ship design, it will need to reach agreement on payment with the companies who design the parts. One likely model is that used in software licensing – either paying per each copy or for each machine that uses the design. This model can also be used aboard commercial vessels and at commercial shipyard facilities. All designs will be easily accessible via a local database, updatable at sea.

Not every part might be more economically manufactured on an as-needed basis. High-volume, heavy use items such as fluorescent light tubes or paper might still be cheaper off the production line. It also might not make sense to carry every rare raw material needed in parts with low rates of failure. Even then, if a failure does occur, printed stand-in parts might allow equipment to function at reduced capacity until a true replacement can be installed.

For a good many items, however, raw material rather than finished products will be the bulk stock under logistics specialists’ care. This in itself won’t free up too much space as the stocked components are essentially still carried on-board, just in a broken-down form, but it will affect the design of storage areas and reduce excess void space from oddly shaped or packaged pieces (goodbye Styrofoam peanuts and bubble-wrap!). This likewise will impact what supply ships carry, how they are designed, and how they conduct replenishments at sea. It also leads to the interesting potential of self-resupply through mining or reclamation – either through intermediary specialized ships, or through new types of drones. Matt Hipple will expound on this further in a future post.

At some stage, designers will begin to build ships with 3D printers embedded aboard. They will need to determine which type is best suited for shipboard use and what core raw materials to keep aboard. They may determine a different type is best for each of the multiple potential uses. What I anticipate are multiple printers in key locations. In addition to the obvious ship supply and machinist shops, repair lockers might see smaller desktop versions that can quickly churn out custom-fitted shoring or patching. The raw material may be distributed via a centralized system or fed locally.

Meanwhile on the messdeck, and in the chief’s mess and wardroom, sailors might soon chow down on printed food, an already demonstrated capability. This could be especially useful for ships with smaller crews with less ability to support a large cooking staff, and could potentially allow a great variety of meal options (though there’s no accounting for taste…).  While Matt predicted the printing of human tissue and organs for medical emergencies if current research bears out in the future, this is probably a feature fleets will install only on larger ships or with large medical staffs, as very few personnel would not otherwise get the necessary care from medical evacuations.

Initial 3D printer testing could involve a few simple commercial off-the-shelf devices to determine potential uses and problems, but it will be a long road to shipboard integration. New Navy Enlisted Classification (NEC) codes and perhaps even new rates will be needed to fill the technically demanding field of maintaining, operating, and just plain experimenting with the printers. However, the sooner fleets and shipbuilders start looking at the advantages and uses of this remarkable new field, the sooner they can reap their benefits.

Fostering the Discussion on Securing the Seas.